Andrew-Paisley

Date- 06/03/2019
Glasgow, 10.30 to 12.00, Passed
1. Took my documents, asked what kind of vessels I was sailing on, and told him product carrier, bulk and vlccs.
2. He started with boiler, what kind of boiler on board last vessel and details.
3. How do you make a boiler furnace inspection?
4. He stopped and asked about enclose space permit?
5. He asked me how you do furnace inspection with pressure and without pressure. I said yes and he asked why?
6. What all checks on tubes and clays and refractory material and how ventilation done how we enter?
7. What all tests on lube oil on board?
8. How do find out water in lube oil?
9. Lube oil testing kit and tests and working principle?
10. Where the water can get contaminated to the lube oil?
11. How purifier works and where water can mix with oil in purifier detail explanation?
12. What all are the temperature sensor and temperature controller and how it works and principle?
13. How water can mix with oil by cooler?
14. Explain tube and shell tube cooler and plate cooler?
15. Shell tube cooler how O-rings and structure of the cooler?
16. How do we find leaks on tube and plugging method and plug material and pressure test?
17. Relation between brass and copper with sea water system?
18. He moved to refer system asked about general questions? Then how temperature is controlled and why solenoid on before the TEL?
19. How to avoid short cycling on refer system?
20. Different types of temperature sensor?
21. Temperature sensor working principles for different type?
22. Bunker tank level sensor and types and working principles?
23. PT100 temperature sensor working principle and range?
24. Ballast tank inspection? What do you check on tank side’s bottom and top?
25. Ballast tank vent checks and important checks on vent?
26. Main switch board safeties, overload trip, preferential trip, reverse power trip explain?
27. Earth fault on switch board?
28. Life boat davit maintenance and regulations?
29. Davit breaks and centrifugal break inspection, measurement and working principle?
30. Safeties on air starting line?
31. Busting disc material and if not available on board if it bust what will be action? If fabrication done what all action and entries to be made?
32. How do you take over from second engineer?