Viewing 1 post (of 1 total)
  • Author
    Posts
  • #15885
    esailor Team
    Keymaster

    Glasgow
    Pass
    1. Tell me about last ship
    2. What is stroke and bore of your engine
    3. How is power assessed
    4. Draw power card and explain how power is calculated
    5. How to do piston and liner overhaul. Procedures and did you have a liner honing tool
    6. How were engines started
    7. Draw staring air diagram from compressor to engine
    8. Explain safeties on this system
    9. Tell me about your propulsion system
    10. How are they controlled and about PID system
    11. How to control Azimuths in an emergency
    12. How to go about setting a boiler safety valve
    13. What L.O testing is done on board
    14. Explain free surface affect
    15. Initial hull inspection in drydock
    16. Fixed fire extinguishing system
    17. What is the state of co2 system when vessel in drydock
    18. What alternative firefighting equipment’s are provided to you when in dry dock
    19. How will you undertake a fire drill on your ship
    20. Life boats and liferafts
    21. Routine maintenance on MOB boat davit
    22. How to make fresh water produced on board safe for drinking
    23. Cooling water tests why we do them and levels
    24. How are large AC induction motors started on your ship? Star delta.thyristors
    25. Why are earth fault dangerous
    26. What will happen if you have a second earth fault
    27. Insulation resistance test and why we do it and what values
    28. List some certificates carried on board.
    29. What PM system do you use on board
    30. Are you required to have a PMS on board
    31. As second engineer, what are your responsibilities as per ISM
    32. What is second engineer’s role in safety meetings
    33. Stopped and passed

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.