[esailor Team]

CANDIDATE: MUHAMMAD HAFIZ
EXAMINER: DAVID LANG LANG
DATE 21 AUGUST 2017 (PAISLAY) 1030am
1- SHIP TYPE
2- PISTON BORE SIZE
3- ENGINE BHP
4- HOW YOU TAKE POWER CARD
5- POWER AND DRAW CARD SKETCH.
6- ENGINE POWER CALCULATION
7- STARTING AIR DIAGRAM
8- WHAT IS THE PURPOSE OF BURSTING DISK
9- CAUSES OF STARTING AIR EXPLOSION
10- FROM WHERE OIL CARRY OVER IN STARTING AIR LINE
11- AIR COMPRESSOR SAFTIES AND ALARMS
12- CYLINDER HEAD REMOVAL PROCEDURE COMPLETE
13- WHAT IF HYDRAULIC NUT STUCK IN PLACE?
14- PISTON REMOVAL PROCEDURE
15- PISTON CALIBRATION AND READING
16- LINER CALIBRATIONS AND READINGS
17- WHAT TOOL YOU USE FOR LINER CALIBRATION.
18- L.O TESTS ON BOARD.
19- JACKET WATER TESTS AND READINGS.
20- JACKET WATER CHEMICAL DOSING.
21- FRESH WATER GENERATOR REGULATIONS.
22- FRESH WATER TANK REGULATIONS.
23- BOILER SAFETY VALVE SURVEY AND SETTING.
24- IN DRYDOCK HULL SURVEY
25- RUDDER CHEAKS AND PRESSURE TEST
26- WHAT HOLDS THE RUDDER WEIGHT?
27- HOW TO MEASURE PINTLE AND JUMPING CLEAREANCE
28- PROPELLER CHECKS
29- STERN TUBE CHECKS AND WEAR DOWN (POKER GUAGE)
30- STEERING TEST AND 100 % REDUNDENCY
31- STEERING MOTOR PROTECTION AND OVERLOAD.
32- WHAT IF IN UMS STEERING GEAR LEAKAGE OCCURS
33- STAR DELTA DIAGRAM
34- HOW TO ISOLATE CIRCUIT BREAKERS
35- WHAT TEST YOU DO ON CIRCUIT BREAKERS
36- BATTERY ROOM CHECK AND BATTERY CHECKS.
37- WHAT FIRE PROTECTION SYSTEM YOU HAVE ON BOARD.
38- EARTH FAULT DETECTION & VALUE
39- INSULTION RESISTANCE MINIMUM VALUE.
40- CO2 SYSTEM ON BOARD MAINTENANCE
41- CO2 SYSTEM SHORE TEAM MAINTENANCE AND HOW TO BLOW CO2 LINE
42- DRAW FUEL PUMP HELIX AND WHAT CONTROL THE FUEL TIMING
43- SEA WATER PIPE REPLACEMENT
44- SEA WATER PIPE MATERIAL
45- FIRE PROTECION STRUCTURE SYSTEM ( CLASS BULKHEAD)
46- A60 BULKHEAD USES
47- ENGINE ROOM BULKHEADS TYPES
48- WHERE A60 BULKHEADS USES IN ACCOMUDATION
49- FRESH WATER TANK INSPECTION PROCEDURE IN DRY DOCK
50- FUEL OIL TANK INSPECTION PROCEDURE IN DRY DOCK
51- IF SHIP GROUND WHAT WILL YOU DO AS A 2ND ENGINEER
52- BRIDGE INFORMS ENGINE CONTROL IS NOT WORKING WHAT YOU WILL DO.
53- HOW TO START ENGINE AT LOCAL STATION.
54- WHAT CERTIFACTES YOU CARRY ON BOARD SHIP
55- ISM CERTIFICATES
56- DOC AND SMC VALIDATIONS.
57- HOW ISM EFFECT YOU AS A 2ND ENGINEER
58- HOW YOU MANAGE A NEW CADET ON BOARD.
59- CADET TRAINING AND REST HOURS.
60- FINALLY HE SAID 3 GOLDEN WORDS, ( CONGRATES YOU PASSED)

[Author]

Posts