Viewing 1 post (of 1 total)
  • Author
    Posts
  • #15855
    esailor Team
    Keymaster

    RESULT: PASS
    DATE: 03/04/2019, TIME: 1100HRS- 1200HRS
    1. Type of ships sailed.
    2. What major o’hauling you have done.
    3. Have you done liner O’haul.
    4. Take over as chief engineer, mainly what documents you will check.
    5. Condition of class and memorandum of class?
    6. NOx file content.
    7. Dual Fuel engine working for 2 stroke and 4 stroke, what kind of gas used?
    8. Hull Inspection in dry dock.
    9. Inspection on rudder, Pintle clearance where to take and how. What takes rudder load, function
    of Pintle.
    10. Inspection of anchor especially was looking for bitter end to check for stuck up.
    11. Inspection of anchor chain.
    12. Inspection of bulbous bow , mainly he was interested Panting and Poundings.
    13. Draw and explain ICCP system.
    14. What are fitted bolts and where are they used, what if you no fitted bolts were used?
    15. How to take crank case deflection and why it is taken, He was looking for graph, important
    points to consider before actual start.
    16. Inspection of CPP propeller in dry dock.
    17. How Blades of CPP are rotated, explain with a hydraulic diagram.
    18. What if you CPP hydraulic system failed at sea and cannot be repaired, how you will reach next
    port will you ask for salvage? I answered in this case blades will go to fail safe which is set to
    Ahead direction so we can go to next port, he was convinced with the answer.
    19. What is Nairobi Convention is about?
    20. ISM code in details, how it affect you as Chief Engineer.
    21. Lots of questions on Insurances applicable to the vessels.
    22. If new Crew joined don’t understand English your action?
    23. Complaint handling procedure.
    24. Certificate/Document only applicable to container vessel (Since I sailed on containers only).
    25. Special requirement for Bulk Carrier as per SOLAS Chapter 12.
    26. Free surface effect , explain with diagram?
    27. MLC in details, certificate, purpose.
    28. How Spread of fire is controlled onboard.
    29. Difference between A60 and A30 Bulkhead, was looking for insulation.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.